Ask a question about this product...

This proximity card reader is a perfect access control device for inside doors in any sensitive area. Maximum distance is approximately 15cm (5.9 inches). Users have an LED and a buzzer to indicate status, and a keypad is available for PIN input.

Constructed of tough ABS plastic.

Features:

• 12 character numeric keypad
• 1 red/green LED
• Buzzer
• 11 sets of time codes
• Up to 120 holiday schedules
• Keypad will lock for 30 seconds after continuous error operation
• Built-in watchdog to prevent system halting
• Support delay relay auto-relock function
• RS-485 support for networking (via controller or directly)
• Built-in reader and additional reader support port for exit or anti-pass-back function
• Control mode, card capacity and card type assignable by user directly
• RF Frequency / Reading range 125 kHz / 10-18cm
• Networking: RS-485, 9600, N, 8, 1
• External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
• Door relay: 12VDC @ 2A NO/NC/COM 0.1-60 sec. latch type
• Alarm relay: transistor output/serial output (selective)
• DI input: Egress button / door sensor / card sensor
• Tamper switch
• Serial port: limit switch (form C)
• Made of ABS plastic
• Dimensions: 112mm x 76mm x 25mm (4.41" x 2.99" x .98")
• Connect to PC using ECL-CN550